GUKF SPIC KUWAIT

S.No. Position Qualification Years of Experience Area of Experience Nos. Salary Range (KD) 1 Engineer (Piping Package) Bachelor’s degree in mechanical engineering from a recognized University 8+ Years Experience in handling Piping Isometrics, P & ID, Piping GA drawings and other relevant drawings and documents. Preparation of Material take-off. Quantity surveying. Resolution of Site/Technical Queries. Weld map and Test package preparation. Work request for prefabrication activities. Drawing Data population, Work request for prefabrication activities and Project Progress tracking. Project Progress tracking. Oil and Gas Gulf Experience approved Engineer preferable. Codes Knowledge : ASME, ASTM and other Industry Standards and Codes 2 800 2 Engineer (Quantity Survey) Bachelors degree in Mechanical Engineering from a recognized University 8+ Years Experience in handling Piping Isometrics, P & ID, Piping GA drawings and other relevant drawings and documents. Material take-off, Quantity surveying. RFQ quantity&Subcontract quantity. Progress quantity of Tags/Item code/Spools/Joints. RFI Cleared quantity of Tags/Item code/Spools/Joint. Drawing Data population, Work request for prefabrication activities and Project Progress tracking. Project Progress tracking. Method of measurement is as per subcontract. Oil and Gas Gulf Experience approved Engineer preferable. 2 800 3 Mechanical Engineer (Quality Control) Bachelors degree in Mechanical Engineering from a recognized University 8+ Years To review the Contract documents and specifications to understand the requirement of Quality related activities. Preparation of Inspection Test Plan, Inspection and Test Procedure and Technical Delivery condition in compliance with Contract specification and relevant applicable codes and standards. Preparation of WPS, Procedure Qualification (PQR) and WPQ based on Contract requirements and ASME Sec IX, AWS D1.1 amd API 1104. Review of Vendor's Inspection and Test Plan, NDE Procedure, PMI Procedure, Hardness test Procedure, Pressure Test Procedure, Factory Acceptance Test Procedure, WPS, PQR, Surface Preparation & Painting Procedure, Packing Procedure in compliance with Contract specification, applicable codes and standards. Review of all MTC's compliance with Contract specifications and applicable codes and standards etc. Review of Inspection and Test reports as per approved ITP and in line with relevant codes and standards. Review of Inspection and Test reports as per approved ITP and in line with relevant codes and standards. To Evaluate Manufacturer and Supplier by Auditing as per Project Quality requirements. Participating in Client Meeting and discuss/update about manufacturing inspection status and Technical Clarifications. Inspection Coordination with Client, Vendor and Third party inspectors for all stages as per approved ITP. Involving various inspection activities during material receiving inspection as per Project Quality Requirements. Additional certification :ASNT LEVEL II (RT, UT, MT and PT), CSWIP 3.1, ISO 9001. Codes Knowledge : ASME B31.3, B31.4, ASME SEC II, V, IX, VIII Div-I, API 1104, AWS D1.1 2 800 4 Mechanical Engineer (Rotating Equipment) Bachelors degree in Mechanical Engineering from a recognized University 8+ Years Must have knowledge of Rotating Equipment in Refinery, Oil & Gas, Chemical, and Petrochemical industries. Able to review the Contract documents and specifications to understand the requirement of Rotating Equipment related activities. Must have Experience in Detail Engineering & Procurement of Dynamic pumps like Centrifugal Pumps (Horizontal/Vertical), Submersible, Fire Pumps. Must have Experience in Detail Engineering & Procurement of Positive displacement pumps like Diaphragm, Gear, Piston, Lobe etc., Must have Experience in Detail Engineering & Procurement of Gas Compressor packages & Gas Turbine Generator Packages etc., Must have Experience in preparing/reviewing Material Requisition (MR)/ Purchase Specification (PS) of Inline items based on Contract requirement and International Codes & Standards. Must have Experience in preparing Request for Quotation (RFQ) for floating. Must have Experience in reviewing Vendor/Manufacturer Technical Offers/Bids, able to raise Technical Queries (TQ's) and Conduct technical meeting to resolve/close all Outstanding points. Must have Experience in preparing Technical bid evaluation report for client review & approve. Must have Experience in reviewing Vendor/Manufacturer Datasheet, documents, specification etc., and submit the same for Client review & approval. Must have Experience in Material Selection (CS/SS/DSS/SDSS/CU-NI etc.,) and knowledge in Alternate Material selection. Well conversant in the design codes and standards like API, ISO, ASME, Shell DEP Standards, KOC Standards, KNPC Standards etc. related to Rotating Equipments.Oil and Gas Gulf Experience approved Engineer preferable. Codes Knowledge : API610, API611, API612, API614, API 617, API618, API682, API 692, API 691 2 800 5 Mechanical Engineer (Automated Valve & Inline Items) Bachelors degree in Mechanical Engineering from a recognized University 8+ Years Must have knowledge of Control Valve, On/Off Valves, manual Valves in Refinery, Oil & Gas, Chemical, and Petrochemical industries. Able to review the Contract documents and specifications to understand the requirement of Automated and Manual valves related activities. Must have Experience in Detail Engineering & Procurement of Automated Valves, Manual Valves and Inline items in Piping. Must have Experience in preparing/reviewing Material Requisition (MR)/ Purchase Specification (PS) of Inline items based on Contract requirement and International Codes & Standards. Must have Experience in preparing Request for Quotation (RFQ) for floating. Must have Experience in reviewing Vendor/Manufacturer Technical Offers/Bids, able to raise Technical Queries (TQ's) and Conduct technical meeting to resolve/close all Outstanding points. Must have Experience in preparing Technical bid evaluation report for client review & approve. Must have Experience in reviewing Vendor/Manufacturer Datasheet, documents, specification etc., and submit the same for Client review & approval. Must have Experience in Material Selection (CS/SS/DSS/SDSS/CU-NI etc.,) and knowledge in Alternate Material selection. Well conversant in the design codes and standards like ASME SEC VIII, API, TEMA, Shell DEP Standards, KOC Standards, KNPC Standards etc. related to Static Equipment’s. Oil and Gas Gulf Experience approved Engineer preferable. Codes Knowledge : ASME SEC VIII DIV-1 & 2, PED 2 800 6 Engineer (Proman Software) Bachelors degree in Mechanical/Computer Science Engineering from a recognized University 5+ Years Experience in handling Piping Isometrics, P & ID, Piping GA drawings and other relevant drawings and documents. Drawing Data population, Work request for prefabrication activities and Project Progress tracking by using EPC-PROMAN software (Experience in AutoSpool, Spoolman and ERMan modules are mandatory). Material take-off. Quantity surveying. Site/Technical Queries. Weld map and Test package preparation. Work request for prefabrication activities. Project Progress tracking. Codes Knowledge: ASME, ASTM and other Industry Standards and Codes, PROMAN 2 500 7 Static Equipment Design Engineer Bachelors degree in Mechanical Engineering from a recognized University 8+ Years 1.Review contract documents, design basis, specifications, datasheets and project requirements for static equipment. 2.Perform/review design and detailed engineering of pressure vessels, columns/towers, storage tanks, heat exchangers, separators, drums and packaged static equipment. 3.Prepare/review equipment datasheets, design calculations, specifications, Material Requisitions (MR), Purchase Specifications (PS) and technical requisitions. 4.Review PV Elite/TANK/COMPRESS or equivalent calculations, nozzle load checks, local stress calculations and FEA reports where applicable. 5.Review vendor technical offers, raise Technical Queries (TQs), conduct technical clarification meetings and prepare Technical Bid Evaluations (TBE). 6.Review vendor drawings/documents including GA drawings, fabrication drawings, calculations, welding/NDE requirements, material certificates and manufacturing procedures. 7.Verify material selection including CS, LTCS, SS, DSS, SDSS, alloy materials and corrosion allowance in accordance with process conditions and project requirements. 8.Coordinate with Process, Piping, Civil/Structural, Instrumentation, Electrical, Procurement, QA/QC and Construction disciplines for equipment interfaces. 9.Review nozzle orientation, platform/ladders, internals, supports, lifting arrangements and transportation requirements. 10.Support resolution of vendor deviations, technical concessions, NCRs and site/fabrication queries. 11.Participate in design reviews, model reviews, HAZOP/action closeout and constructability reviews as applicable. 12.Support inspection/FAT activities and review inspection/test requirements in coordination with QA/QC. 13.Ensure all deliverables comply with applicable codes, client specifications and approved project procedures. 14.Maintain deliverable schedules and provide clear status on engineering, procurement and vendor-document progress. Additional Certification: Knowledge of Pvelite software. 2 800 8 Cathodic Protection Design Engineer Bachelors degree in Electrical Engineering from a recognized University 8+ Years 1.Review contract documents, CP design basis, specifications and project requirements. 2.Conduct/review pre-design surveys including soil resistivity, current drain, interference and site surveys. 3.Design impressed-current and sacrificial-anode CP systems for pipelines, flowlines, well casings, tanks, vessels, buried piping and associated facilities. 4.Perform/review CP calculations including current demand, anode sizing, groundbed design, transformer-rectifier sizing, cable sizing and design life. 5.Prepare/review CP philosophy, specifications, datasheets, layouts, schematics, installation details, cable schedules and monitoring requirements. 6.Prepare MR/RFQ packages and technical requirements for CP materials and equipment. 7.Review vendor offers, raise TQs, conduct technical clarification meetings and prepare TBE. 8.Review vendor drawings/documents and ensure technical comments are incorporated before client submission. 9.Coordinate with Electrical, Piping, Civil, Pipeline, Instrumentation, Procurement, QA/QC and Construction teams. 10.Support installation, testing and commissioning of CP systems including polarization, potential measurements and interference testing. 11.Review commissioning procedures, monitoring programs, O&M manuals and post-commissioning survey reports. 12.Support troubleshooting of CP under-protection, over-protection, interference and continuity/isolation issues. 13.Ensure compliance with AMPP/NACE standards and client/project specifications. 14.Maintain engineering deliverables and provide progress/status updates through project completion. Additional certification : NACE Certification, Codes Knowledge : NACE SP0104, NACE SP0169, NACE SP0177, NACE SP0200, NACE SP0286, NACESP0572 1 800 9 Process Engineer Bachelors degree in Chemical Engineering from a recognized University 5+ Years Experienced in Process Design works in Refinery, Oil & Gas and Petrochemical industry. Working knowledge in Aspen / UNISIM, PIPESIM, HTRI, Flare net, Pipe net, SPPID is required. Experience in preparation of PFD, P&ID, Cause & Effect Diagrams, Line list, Tie-in List, Process calculations (like Pump Hydraulics, Equipment sizing, line sizing, PSV / TSV sizing & Surge analysis, etc.), Control philosophy, Operation & Maintenance manual and commissioning procedure. In depth Knowledge on process software is mandatory. Experience in participation of Process Safety studies like HAZOP, SIL, QRA and PHSER studies. Vendor package review and preparation of Process data sheets for the equipment & Instruments. Codes Knowledge : International Standard code (ASC,) 2 500 10 Civil Design Engineer Bachelors degree in Civil Engineering from a recognized University 8+ Years 1.Review contract documents, design basis, specifications, geotechnical information and civil scope requirements. 2.Perform/review civil engineering for equipment foundations, buildings, roads, paving, trenches, culverts, drainage, underground networks and miscellaneous civil works. 3.Prepare/review design calculations, civil layouts, grading/drainage drawings, foundation drawings and construction details. 4.Prepare civil MTO/BOQ, specifications, scopes of work, MR and technical requisitions. 5.Review geotechnical reports and apply appropriate soil parameters, bearing capacity, settlement and groundwater considerations. 6.Coordinate equipment foundation loads and interfaces with Static, Rotating, Piping, Electrical, Instrumentation and Structural disciplines. 7.Review vendor foundation/load data and ensure incorporation into civil design. 8.Review technical bids, raise TQs and support TBE for civil materials/subcontract packages. 9.Review vendor/subcontractor drawings, method-related technical documents and material submittals. 10.Ensure underground services, roads, drainage and foundations are coordinated to avoid clashes and constructability issues. 11.Participate in model/design reviews and resolve site RFIs, design changes and as-built requirements. 12.Support construction teams with technical clarifications and field engineering. Codes Knowledge : International Standard code (ASC,) 13.Ensure designs comply with applicable codes, client standards, HSE and project specifications. 14.Maintain engineering deliverable schedules and provide progress/status reports. 2 800 11 Structural Design Engineer Bachelors degree in Civil & Structural Engineering from a recognized University 8+ Years 1.Review the Design and analyze structural steel buildings, warehouses, platforms, pipe racks, mezzanines, canopies, industrial structures, and other steel structures. 2.Develop accurate 3D structural steel models using Tekla Structures. 3.Prepare general arrangement drawings, fabrication/shop drawings, assembly drawings, erection drawings, and connection details. 4.Prepare structural calculations and design reports using STAAD Pro, SAP2000, ETABS, or other approved structural analysis software. 5.Design steel members, bolted and welded connections, base plates, anchor bolts, bracing systems, and supporting elements. 6.Generate material take-offs, BOQs, cutting lists, bolt lists, and CNC/NC fabrication files from Tekla. 7.Review client drawings, project specifications, design criteria, and applicable codes before starting the design. 8.Ensure compliance with AISC, ASCE, IBC, and AWS standards and project requirements. 9.Coordinate with estimation, procurement, production, fabrication, quality, and site erection teams. 10.Review and check shop drawings, connection details, and Tekla models before issuing them for fabrication. 11.Optimize steel structures to achieve safety, constructability, material efficiency, and cost-effective solutions. 12.Resolve design, fabrication, and erection-related technical issues and respond to RFIs. 13.Prepare design revisions and as-built drawings in accordance with approved site modifications. 14.Coordinate with clients, consultants, and subcontractors regarding technical comments and approvals. 15.Maintain proper document control and ensure drawings are issued according to the project schedule. 16.Provide technical support during fabrication, assembly, and site erection activities. Additional certification : Advanced proficiency in Tekla Structures, Strong proficiency in AutoCAD., Professional experience in at least one structural analysis program, such as STAAD Pro, SAP2000, ETABS, or Autodesk Robot Structural Analysis. Codes Knowledge : AISC, ASCE, IBC, and AWS standards 1 800 12 Instrument Engineer (Quality Control) Bachelors degree in Electronic & Instrumentation Engineering from a recognized University 8+ Years 1.Review contract documents, specifications, datasheets, drawings and quality requirements for instrumentation and control systems. 2.Prepare/review ITPs, inspection procedures, TDCs, checklists and quality forms for instruments and control-system packages. 3.Review vendor Quality Plans, ITPs, test procedures, calibration procedures and manufacturing records. 4.Coordinate inspection of transmitters, gauges, control/on-off valves, analyzers, F&G devices, junction boxes, panels, PLC/DCS/ESD systems and instrumentation bulk materials. 5.Perform/review material inward inspection against PO/MR, approved datasheets, certificates, packing lists and project specifications. 6.Verify calibration certificates, hazardous-area certificates, material certificates, test reports and instrument configuration records. 7.Participate in FAT/IFAT/SAT and vendor inspections, including loop/logic/interface testing where applicable. 8.Verify compliance of hazardous-area instruments with area classification, protection concept, gas group and temperature class. 9.Raise/follow up NCRs, observations and punch points and verify corrective-action closure. 10.Coordinate with Engineering, Vendor, Procurement, Client/TPI and Site QA/QC for quality and technical resolution. 11.Review inspection release notes, dossiers, MDRs and final quality documentation for completeness and traceability. 12.Support site installation inspection, calibration, loop checking, pre-commissioning and commissioning quality activities. 13.Monitor vendor quality performance and identify risks affecting delivery or acceptance. 14.Ensure compliance with ISO 9001, IEC/ISA requirements, and applicable client/project standards. Codes Knowledge: IEC Standard, IP Ratings, Hazardous area classification & Hazardous Certificate 2 800 13 Electrical Engineer (Quality Control) Bachelor’s degree in electrical engineering from a recognized University 5+ Years 1.Review contract specifications, approved drawings, datasheets and quality requirements for electrical equipment and materials. 2.Prepare/review Inspection & Test Plans (ITP), inspection procedures, Technical Delivery Conditions (TDC), checklists and quality forms. 3.Review vendor/manufacturer Quality Plans, ITPs, procedures and inspection documents. 4.Coordinate inspection of transformers, switchgear, MCCs, VFDs, motors, UPS/DC systems, cables, lighting, earthing and electrical bulk materials. 5.Verify material inward inspection against PO/MR, approved datasheets, certificates, packing lists and applicable standards. 6.Review test certificates, routine/type test reports, calibration certificates, material certificates and hazardous-area certificates. 7.Participate in vendor/shop inspections, FAT and witness/hold-point activities as per approved ITP. 8.Raise and follow up NCRs, observations and punch points; verify corrective actions and closure evidence. 9.Ensure inspection records, release notes and quality dossiers are complete, traceable and properly maintained. 10.Coordinate with Engineering, Procurement, Vendor, Client/TPI and Site QA/QC teams for technical/quality resolution. 11.Verify compliance of Ex equipment with approved hazardous-area classification and certification requirements. 12.Support site receiving inspection, installation inspection, testing, pre-commissioning and commissioning quality activities. 13.Monitor vendor quality performance and report critical quality risks/delays. 14.Ensure compliance with ISO 9001, project QMS, client specifications and applicable IEC/IEEE standards. Additional certification: ISO 9001 Audit certification, Oil and Gas Gulf Experience IEC Standard, Codes Knowledge : IEEe Standard, IP Certification & Atex certification 2 500 14 Piping Supervisor (Technical Services) Diploma in Mechanical Engineering 8+ Years 1.Review project drawings, piping layouts, isometrics, P&IDs, material specifications, MTO/BOM and relevant project requirements before commencement of work. 2.Supervise and coordinate piping-related activities covering material receipt, identification, segregation, storage, issuance and traceability in accordance with approved project procedures. 3.Carry out material inward inspection for piping materials including pipes, fittings, flanges, valves, gaskets, bolting and other piping components; verify quantity, size, rating, material grade, schedule/class, heat number, MTC and physical condition against PO/MR and approved documents. 4.Coordinate with QA/QC, Engineering, Procurement, Warehouse and Site teams for resolution of material discrepancies, shortages, damages, non-conformities and technical clarifications. 5.Verify and maintain accurate piping material data entry in the project/warehouse material tracking system, including receipt details, heat numbers, quantities, locations, inspection status, issue/return status and balance stock. 6.Maintain and update piping material registers, inward inspection records, MRR/MIR status, material reconciliation reports and supporting documentation. 7.Identify and verify mechanical inline equipment/items such as valves, strainers, spectacle blinds, spacers, steam traps, flexible joints, expansion joints, specialty piping items and other inline components against approved datasheets, drawings and specifications. 8.Check mechanical inline equipment for correct tag number, size, rating, material, end connection, flow direction, accessories, preservation and certification prior to acceptance and issuance. 9.Support inspection, identification, tracking and data entry of structural steel materials including beams, channels, angles, plates, gratings, handrails and associated items; verify section, grade, dimensions, quantity and material certificates.10.Maintain structural steel inward and stock registers and coordinate material segregation, identification, storage and issuance to fabrication/site teams.11.Ensure materials are properly tagged, colour coded where applicable, preserved and stored to prevent damage, corrosion, contamination or material mix-up.12.Coordinate with construction/fabrication teams for material availability, priority requirements, material issuance and reconciliation in line with the project schedule. 13.Support field verification of piping materials and inline equipment and assist in resolving mismatches between drawings, material records and actual site/fabrication requirements.14.Monitor surplus, shortage and balance materials and prepare periodic status reports for Engineering/Project Management. 15.Ensure all material handling, inspection and documentation activities comply with approved project specifications, applicable codes/standards, QA/QC requirements and HSE procedures.16.Maintain proper records and provide clear daily/weekly updates on material receipt, inspection, data entry, pending issues and critical shortages. 4 400 15 Tekla Detailer Diploma in Mechnical Engineering 5+ Years Prepare detailed structural steel shop drawings and erection drawings.Develop and maintain accurate 3D structural steel models using Tekla Structures or equivalent software.Prepare Bills of Materials (BOM), Bills of Quantities (BOQ), and material take-offs.Review engineering drawings, specifications, and project requirements to ensure detailing accuracy.Coordinate with engineering, production, and fabrication teams to resolve design and detailing issues.Revise drawings and models based on project updates and client feedback.Ensure all drawings comply with project specifications, fabrication standards, and industry regulations.Support the production team with accurate fabrication documentation and technical information.Maintain organized project documentation and meet project deadlines. International Standard code (ASC,) Proficiency in Tekla Structures, AutoCAD, Autodesk Robot Structural Analysis, or equivalent detailing software.Ability to prepare shop drawings, erection drawings, BOQs/BOMs, and material take-offs.Strong understanding of structural steel fabrication and construction processes.Excellent attention to detail and problem-solving skills.Strong communication and teamwork abilities.Ability to work under pressure and manage multiple projects simultaneously.Familiarity with fabrication and site installation processes.Ability to interpret structural and architectural drawings accurately. 1 300 16 Depatment Assistant Bachelor of Science / Arts 5+ Years Minimum 5+ years of experience in relevant field, computer knowledge with excellent working skills in Microsoft Excel, Microsoft Word, Outlook, and document management. 2 150 17 Instrumentation Engineer (Technical Services) Bachelors degree in Electronics & Instrumentation Engineering from a recognized University 12+Years Should have good experience/knowledge in Systems like DCS, ESD, F&G, GDS, PLC, SSLS, SCADA, AMS, ALMS, IP21, CCTV, Packages, Analyzers, Junction Box, Actuated Valves (ESDV, SBDV, XV & CV), All type of Instruments, Cables, FO equipment’s, Glands and Bulk Materials, Calibrations, Loop/functional checking, Testing (FAT & SAT). Reading the Technical in Contracts & Standards. Preparation of draft letter for scope discrepancies. Review of Engineering Drawings & Documents. To carry out the detailed site survey along with Vendors / Client / Engineering. Procurement related activities such as Preparation of BOM, MR, RFQ, VDRL, Procedures. Review of Vendor’s offers and preparation of TQs and TBE reports for P.O. clearance. Review of Vendor Engineering Drawings & Documents and provide comments/approval. Attending meeting with Client / Vendor / Engineering / Inter-disciplines. Technical support to TS-QC for FAT & MRIR. Technical support to site team to clear any comments by coordinating with Vendors / engineering. Good knowledge, disciplines, team work, self-drive, interest, motivation, exposure & dedication in job/roles responsibilities assigned. 2 800 ~ 1100 18 Instrumentation Engineer (Technical Services) Bachelors degree in Electronics & Instrumentation Engineering from a recognized University 8+Years Should have good experience/knowledge in Systems like DCS, ESD, F&G, GDS, PLC, SSLS, SCADA, AMS, ALMS, IP21, CCTV, Packages, Analyzers, Junction Box, Actuated Valves (ESDV, SBDV, XV & CV), All type of Instruments, Cables, FO equipment’s, Glands and Bulk Materials, Calibrations, Loop/functional checking, Testing (FAT & SAT). Reading the Technical in Contracts & Standards. Preparation of draft letter for scope discrepancies. Review of Engineering Drawings & Documents. To carry out the detailed site survey along with Vendors / Client / Engineering. Procurement related activities such as Preparation of BOM, MR, RFQ, VDRL, Procedures. Review of Vendor’s offers and preparation of TQs and TBE reports for P.O. clearance. Review of Vendor Engineering Drawings & Documents and provide comments/approval. Attending meeting with Client / Vendor / Engineering / Inter-disciplines. Technical support to TS-QC for FAT & MRIR. Technical support to site team to clear any comments by coordinating with Vendors / engineering. Good knowledge, disciplines, team work, self-drive, interest, motivation, exposure & dedication in job/roles responsibilities assigned. 3 700 ~ 800 19 Electrical Engineer (Technical Services) Bachelors degree in Electrical & Electronics Engineering from a recognized University 8+Years Should have good experience/knowledge in Sub-station package, HV/MV/LV Switchgears/Feeders, HV/MV/LV Transformers, 110V/120V UPS Package, Solar Package, HVAC, FACP, MOV, IRP, Lightings, Earthings, Cathodic, Glanding/Splicing, Bulk Materials, Testing (FAT & SAT).Reading the Technical in Contracts & Standards.. Preparation of draft letter for scope discrepancies. Review of Engineering Drawings & Documents. To carry out the detailed site survey along with Vendors / Client / Engineering. Procurement related activities such as Preparation of BOM, MR, RFQ, VDRL, Procedures. Review of Vendor’s offers and preparation of TQs and TBE reports for P.O. clearance. Review of Vendor Engineering Drawings & Documents and provide comments/approval. Attending meeting with Client / Vendor / Engineering / Inter-disciplines. Technical support to TS-QC for FAT & MRIR. Technical support to site team to clear any comments by coordinating with Vendors / engineering. Good knowledge, disciplines, team work, self-drive, interest, motivation, exposure & dedication in job/roles responsibilities assigned. 3 700 ~ 800 20 Telecommunication Engineer (Technical Services) Bachelors degree in Telecommunication / Electronics and communication Engineering from a recognized University 8+Years Should have good experience /knowledge in Systems like LAN & TELECOM, CCTV, PAGA & FOC Loop/functional checking & Testing.Reading the Technical in Contracts & Standards.. Preparation of draft letter for scope discrepancies. Review of Engineering Drawings & Documents. To carry out the detailed site survey along with Vendors / Client / Engineering. Procurement related activities such as Preparation of BOM, MR, RFQ, VDRL, Procedures. Review of Vendor’s offers and preparation of TQs and TBE reports for P.O. clearance. Review of Vendor Engineering Drawings & Documents and provide comments/approval. Attending meeting with Client / Vendor / Engineering / Inter-disciplines. Technical support to TS-QC for FAT & MRIR. Technical support to site team to clear any comments by coordinating with Vendors / engineering. Good knowledge, disciplines, team work, self-drive, interest, motivation, exposure & dedication in job/roles responsibilities assigned.. 1 700 ~ 800